Hause Hydraulic Units
The quill style units are specifically made for endworking tools. Drills, reamers, taps, hones, etc., but they are completely customizeable for your unique application. Whether an off-the-shelf unit or a fully custom unit, bring us your challenge and we’ll help provide a solution. With 1000’s of adaptations and sub-assemblies available.
Model 6400 Holomatic
The 4″ hydraulic Holomatic. Patented Pressure compensated feed valve, easy to use digital depth counter
6494 4″ hydraulic with advance feed and retract feed.
6495 4″ hydraulic with advance feed only
6404 / 6405 discontinued (old style, spare parts still available)
4″ stroke, 2750# thrust advance, 1500# thrust retract, 600lbs-in torque. Normally use these as pressure offset to help keep the internal tubes compressed for more stability. Can be used double acting (like a hydraulic cylinder) for high thrust applications (4250#). With a built in electrical interlock (switches), concentric construction, and easy to use adjustments. 3 1/2″ quill diameter, 190 IPM rapid, rapid advance 0-4″, depth repeatability +-.001″ (with short dwell), 4 1/2″ centerline height.
6495 solidworks
Spindle supports, belt housings, spindle nose choices, gear reductions, dual feed controls available.
Search entire site for “6495”
Model 6600 Holomatic
The 6″ hydraulic Holomatic. Patented Pressure compensated feed valve, easy to use digital depth counter
6694 6″ hydraulic with advance feed and retract feed.
6695 6″ hydraulic with advance feed only
6604 / 6605 discontinued (old style, spare parts still available)
6″ stroke, 2750# thrust advance, 1500# thrust retract, 600lbs-in torque. Normally use these as pressure offset to help keep the internal tubes compressed for more stability. Can be used double acting (like a hydraulic cylinder) for high thrust applications (4250#). With a built in electrical interlock (switches), concentric construction, and easy to use adjustments. 3 1/2″ quill diameter, 190 IPM rapid, rapid advance 0-6″, depth repeatability +-.001″ (with short dwell), 4 1/2″ centerline height.
Spindle supports, belt housings, spindle nose choices, gear reductions, dual feed controls available.
Search entire site for “6695”
Model 6195 Holomatic
The 10″ hydraulic Holomatic. Patented Pressure compensated feed valve, easy to use digital depth counter
6194 10″ hydraulic with advance feed and retract feed.
6195 10″ hydraulic with advance feed only
6104 / 6105 discontinued (old style, spare parts still available)
10″ stroke, 2750# thrust advance, 1500# thrust retract, 680lb-in torque. Normally use these as pressure offset to help keep the internal tubes compressed for more stability. Can be used double acting (like a hydraulic cylinder) for high thrust applications (4250#). With a built in electrical interlock (switches), concentric construction, and easy to use adjustments. 3 1/2″ quill diameter, 190 IPM rapid, rapid advance 0-10″, depth repeatability +-.001″ (with short dwell), 4 1/2″ centerline height.
See Catalog Pages 36-60
Spindle supports, belt housings, spindle nose choices, gear reductions, dual feed controls available.
Search entire site for “6495”
Model FD6-130
Standard flow control and stop,
70mm centerline height, 1900# @ 280 psi, 130mm stroke, , 5/8″ drill capacity,
Spindle ER20 or 25, JT6 or JT6 multi, AS22, Morse #2 or #3
Flow control on either side.
Search entire site for “FD6-130”
Model FD62-100
Standard flow control and stop. Belt housing can be mounted at 45 deg. intervals, +-.0005″ repeatability with short dwell.
4″ stroke, 2000 rpm max. 5/8″ drill capacity, 1900# @ 280 psi
Spindle ER20 or 25, JT6 or JT6 multi, AS22, Morse #2 or #3
Flow control on either side.
Search entire site for “FD62-100”
Model FD7-150
Standard flow control and stop. Belt housing can be mounted at 45 deg. intervals, +-.0005″ repeatability with short dwell.
5.5″ stroke, 1500 rpm max. 1″ drill capacity, 3124# @ 280 psi
Spindle ER40, MT3, AS32, or FB30
Flow control on either side.
Search entire site for “FD7-150”
Model FD75-150
Standard flow control and stop. Belt housing can be mounted at 45 deg. intervals, +-.0005″ repeatability with short dwell.
5.5″ stroke, 1000 rpm max. 1 1/4″ drill capacity, 3124# @ 280 psi
Spindle ER40, MT3, or FB30
Flow control on either side.
Search entire site for “FD75-150”
Model FD8-150
Standard flow control and stop. Belt housing can be mounted at 45 deg. intervals, +-.0005″ repeatability with short dwell.
5.5″ stroke, 1500 rpm max. 1 3/8″ drill capacity, 3124# @ 280 psi
Spindle ER40 or 50, MT4, FB30, or NT40
Flow control on either side.
Search entire site for “FD8-150”
Model FD85-150
Standard flow control and stop. Belt housing can be mounted at 45 deg. intervals, +-.0005″ repeatability with short dwell.
5.5″ stroke, 1800 rpm max. 1 5/8″ drill capacity, 3124# @ 280 psi
Spindle MT4, FB30.
Flow control on either side.
Search entire site for “FD85-150”
809 S. Pleasant St.
Montpelier, OH 43543
Call us
419.485.3158
Contact us
sales@hausemachines.com